You have the right to return the item
for 60 days after delivery
Just like in other sectors, there are a lot of jewellery descriptions and specific terms which you might not know and would like to know more about. Our jewellery glossary will give you an overview as well as some additional information on the most common jewellery and ring terminologies. Glamira glossary ranges from the different kinds of metals and alloys to diamond cuts and other technical jewellery terms. Let yourself be inspired by our wide selection!
an alloy is a mixture of different metals. In the case of precious metals such as gold, silver, palladium or platinum the manufacturing usually takes place after the metals have already been alloyed.
aurum is the Latin term for gold with the chemical element "AU". This precious metal was one of the first known metals. Since pure gold or gold is very soft and therefore extremely prone to scratches, it is alloyed with other metals such as copper, silver and palladium.
a diamond cutting style which is rectangular. Usually seen as accent stone.
Two-coloured; the colour of the ring (metal colour) can either be of one, two or more colours, In this case one would talk of multi-coloured.
This is the superlative cut for a gemstone, in most cases a diamond. This cut shows off the diamonds depth, magnificence and particularly its maximum light reflexion.
Carat is a unit of weight for all kinds of gemstones and diamonds.
Clarity regards to the amount and size of faulty or imperfect spots which appear on almost every diamond. These faulty areas are so tiny that they do not have an effect on the beauty of a diamond.
Only some diamonds are colourless or even white. They usually have an intense to have a yellow, brown or grey shade. It is essential, the weaker the colour the more precious the diamond. Often they only differ in little nuances, which cannot be perceived by untrained eye.
The value factors Colour, Clarity and Carat are largely given by nature in contrast to the Cut which is determined by man. Cut refers to the cut design, proportions and symmetry of a diamond. An inaccurate cut can cause that the diamond reflects less light, or shows no coloured sparkle at all. Diamonds can be cut in diverse shapes. However, only the classic brilliant cut is acknowledged worldwide as the standard of evaluation.
In Greek – adámas – meaning unbreakable. Diamonds are the oldest gemstones and hardest raw materials on earth, also used for decorative purposes. Diamonds consist of crystallized carbon, which was created millions of years ago under immense heat (about 1,250 °) under high pressure (40-60 atmospheres) at a depth of 150-200 km, in the melting pot of glowing lava. Volcanic eruptions threw the raw crystals to the surface. Most diamonds are over 100 million years old.
Diamond engraving is a common method when it comes to jewellery. Thereby the material is not cut but suppressed which is why the colour of the surface can be maintained. In this way engraving can be made on curves as well without any problems. Moreover this way of engraving ensures a high quality and stability of the actual engraving for which reason it is especially qualified for very fine motives.
A gemstone which consists of a combination of either simulated materials or natural gemstones.
Eternity rings symbolise everlasting love and are common gifts for an anniversary. A typical landmark for eternity rings is the numerous diamonds or gemstones which are set around the complete band.
Engagement rings are worn prior to the actual wedding by both the bride and groom to be. Diamond solitaires are one of the most common engagement ring types. Anyhow engagement rings can be of any colour just as the stone type.
This refers to the ring profile. A flat court and a comfortable court fit due to a light curve on the interior are typical characteristics of a flat court
Derives from filum granum = granulated wire. Filigree jewellery are decorative wires with complex patterns which are mostly twisted.
Gemstones are beautiful minerals which are used to make jewellery. But before jewellery can be made, gemstones need to be cut and polished.
Also known as aurum this is Latin and stands for gold. Gold is a precious metal and in its pure status too soft to be worn in every-day life. Consequently it needs to be alloyed with other metals such as silver, palladium or cooper.
Common are alloys with a standard portion of 333, 585 and 750. This means that by 1000 parts of metal 585 parts of pure gold are included. A ring can never consist of pure gold, as the metal itself is very soft and would scratch quickly. To avoid this, the gold is alloyed with other metals. By alloying gold the material becomes harder and it can be achieved a variety of color variations, such as white gold, yellow gold and rose gold.
Granulation is a structure-surface technology which combines shapes and welds little beads of silver or gold to ornaments - one of the oldest techniques to process the surface.
Precious metals such as gold or silver must be marked and registered with the so called manufacture’s hallmark.
A gemstone or diamond in a finger ring in which the stone is placed in a collet to improve the apparent size of the actual stone.
A term which applies to two different minerals – jadeite and nephrite. These two minerals consist of different chemical compositions. The most known and valuable colour of jadeite is green.
This term is equitable to the expression guard ring.
The laser engraving is a relatively new method of engraving. Using this technique the top layer of the engraved material is being removed accurately. Consequently, the motif is replaced by the colour of the core material. Due to laser engraving, engraving can be made very precisely.
Gold, Silver, Platinum and Palladium, Titanium or Stainless Steel are all metals
A multisizer works just like a belt. In order to measure your ring size you need to push the open end through the buckle up to receiving a ring shape. Now slip the sizer onto your ring finger and adjust it. Note that it is not too tight nor to loose. It should just slip over your knuckle. Through this process you can determine your correct ring size.
Navette is a cutting style for a precious stone which is also called marquise. The cut is characterized by an oval and tapered shape and is mainly used for transparent stones.
Nickel is a chemical element being used in connection with alloys for thousands of years. Especially silver and white gold can contain up to 20% nickel regading alloy.
An oxidation is a chemical reaction of a substance with oxygen. A consequence of oxidation is a dark surface. In most cases this happens when silver jewellery encounters with air.
A solid, transparent gemstone, always cut en cabochon and at times carved.
A cutting style for gems. As the oval cut is a version of the round cut (brilliant), it also looks similar to the brilliant cut.
Palladium is a rare metal which belongs to the platinum group. It inhabits comparable properties as platinum except for the weight. Palladium is lighter. In regard of jewellery is mostly alloyed with silver or gold.
Setting stones in paving-like patterns. Gemstones are usually held by small claws typically with holes drilled through the setting.
A square cutting style for a diamond. With 144 facets, the Princess-cut is one of the most costly cutting types.
The name derives from the Spanish word platina, a diminutive of plata (= "Silver").
- Chemical symbol: "Pt"
- Density of 21:45 g / cc
- Melting point is 1773 °.
Platinum is considered as the noblest and most precious metal, but also as the most expensive. It is very rare and difficult to forge.
A gemstone species. Some of the most known types are amethyst and citrine.
A tool for measuring and defining one's ring size.
Rose gold is produced by alloying mainly copper to gold - and possibly some silver, which will make the processing easier. The shade of rose gold is comparable to copper.
In nature, silver occurs in solid (pure) form, but it can also be alloyed with other metals, such as gold, copper, bismuth, etc. Silver is mostly alloyed with copper.
- Chemical symbol: "Ag" (Latin argentums)
- Denisty 10.50 g/cc
- Melting point 960 °
The shape describes a diamond’s form and appearance, for example round, princess, emerald, oval or radiant. All of these shapes have a different form and other different attributes.
Refers to the ring profile which is slightly rounded on the inner and the outer court.
Just like with gold, pure silver is quite soft and therefore easily malleable. Consequently pure silver is prone to damages which is why it is combined with other metals to become a more robust metal. In this case the most common method is to alloy pure silver with sterling silver. Sterling Silver consist of silver and copper.
Is a diamond, which is set separately in a ring. Other gemstones that are set separately just like a diamond are also called solitaires, such as ruby, sapphire or emerald solitaires.
Due to it’s low density, Titanium (Ti) is a very light metal. It is much harder than aluminium and magnesium. It shines naturally silver, is very light, but still firm, elastic, resistant to corrosion and heat resistant.
A heavy rounded inner and outer ring court.
Also called multi-coloured rings such as a mixture of Rose-/White and Yellow Gold.
Also known as Wolfram with the chemical symbol W and a density of 19.3 g / cm ³.In its pure state it is a supple, well-formable metal. For these reasons, it is mostly used as filament in light bulbs.
Victorian jewellery has its name due to Queen Victoria’s reign.
White gold itself does not exist, it needs to be produced. As a result it needs to be alloyed with other metals to obtain the white colour. Initially mostly nickel was used to obtain white gold. But since nickel can cause allergic reactions in some cases, manganese or palladium are used instead. Manganese leads to a slight yellowish shade, palladium eliminates it and the jewellery is getting darker which is why it is also called "grey gold".
Yellow gold depicts most the original colour of pure gold. It is usually alloyed with an equal percentage of copper and silver. This has a great influence on the colour of the metal. A decreasing gold content also reduces the depth of the yellow tone. A bright yellow can be achieved with visible silver content up to a yellow-orange shade.
Cubic Zirconia (CZ) are man-made/synthesized crystals. Due to the favourable price they are often used as imitations for diamond jewellery. A good zirconium stone can barely be distinguished from a diamond just by looking at it. A widespread phenomena are zirconium stones with brilliant cut.